EXHAUST MUFFLER Constructed of stainless steel and packed with ceramic insulation. The straight through design eliminates any backpressure and reduces exhaust noise by up to 50% (part # 13008 - 1 Ω”, 13009 - 2”). Also available in cold rolled steel. (part # 13006).
EXHAUST PIPE Flexible stainless steel exhaust pipe will allow you to connect the heater to the thru-hull exhaust fitting. The hose is flexible and allows you to easily route the exhaust around corners or other difficult situations part # 5134 - 2” (52mm) o.d., 5133 - 1 Ω” (38mm) o.d. Insulating heat sleeve is available to prevent burns from contact with the exposed hot exhaust pipe. (part # 5136 - 2”, 5135 - 1 Ω”). Good quality T clamps should be used on all exhaust connections
AIR INTAKE FLEXIBLE TUBING Allows you to connect the heater to the thru-hull fitting providing outside combustion air for a sealed combustion system. (part # 8019)
THRU-HULL EXHAUST /INTAKE FITTING Consists of a 2”(52mm) or 1 Ω”(38mm) exhaust outlet and a 2” air inlet, providing a balanced system for the heater. Short and long sizes available for various hull thicknesses. Also available with a 90 degree elbow.
THRU HULL PLUG - Stainless Steel to fit 1 1/2" and 2" Exhaust / Intake Thru Hulls
