View all Accessories on one PDF File
FAN HEATER Constructed of a copper core and stainless steel enclosure, these heaters provide up to 10,000 BTU/h (2.9kW) of hot air. The Cabin and Spacesaver Heaters produces up to 140 cfm. and draws a minimal amount of current (.9 amps). The fan can be cycled thermostatically to allow regulation of the amount of heat delivered to a particular area. An integral aquastat prevents the fan from coming on until the heater has warmed up enough to eliminate the circulation of cold air.
High output fan use a larger 5 blade metal fan that increases the above numbers up to 40 %.
The Defrost Heater, provides up to 28,000 BTU/h and uses a three speed fan switch, 200/275/450 CFM, 40/55/100 watts. All of the above fan heaters can also run directly off the engine and provide heat whenever the engine is running.
Cabin Heater |
part # 6002: |
6”H X 10”W X 6”D |
(15.5cm X 25.5cm X 15.5cm) |
Spacesaver Heater |
part # 6094: |
3.8"H X 10"W
x 7.2"D |
(9cm X 23cm X 18cm) |
Defrost Heater |
part # 6048 |
6"H X 10"W X 9"D |
(15.5cm X 25.5cm X 23cm) |
6002 and 6048 are also available in 24 volts
CABIN #6002 SPACESAVER #6094 DEFROST #6048 HIGH OUTPUT #6093
AIR OUTLET PLATES These plates allows you to modify our cabin heater and the cabin defrost heater to permit ducting of warm air to one, two, or three separate outlets. Available in 2", 3” and 4” combinations
#1014 #1007 #1056
AIR OUTLET GRILLS
#1057 #1049 #6035
#1050 4" #1009 3" & 4" duct #1051 3" #60011 2"